Acerca de
After Care & Maintenance
Congratulations on your brand new protective coating. On this page we will discuss how to care for your new coating.
Our coatings are designed to protect your factory clear coat, to provide a protective shield against the elements, and to keep your vehicle looking new always. To maximize the effects of it and to ensure your investment is long-lasting, a few basic maintenance steps should be taken. With simple care, your coating will reward you for years to come.
Curing Process
A new protective coating will take about 2-3 days to cure to its full strength. During that time, some precautions should be taken.
Curing time is 2-3 days depending on environmental conditions such as humidity and temperature. Take special care during this time period. The coating will help prevent your clear coat from getting water spots as it is hydrophobic, however, it can still get hard water spots. Be especially diligent during the curing process to prevent water spots, which may be costly to remove.
During the curing process avoid:
-
Parking under trees especially if there are shedding. You don’t want tree sap on a fresh coating.
-
Allowing bird droppings, sap or pollen to sit on the car and bake in the sun.
-
Washing or abrading the paint.
If you notice that your car gets water spots, bird droppings, bugs, tree sap, or other contaminants during the first few days, immediately remove it following our care instructions. Keep in mind the coating is still curing. Be gentle when working on the paint.
Car Washing Techniques
-
Wash on a bi-weekly basis to avoid excessive contamination build up.
-
Avoid washing in direct sunlight to minimize streaking and water spotting.
-
Wash from the top down leaving the dirtiest sections for last to avoid cross contamination.
-
Use the “two bucket” method – one bucket for rinsing your sponge/mitt and one for soapy water.
-
Use separate soap and sponge/mitt for wheels.
Drying
-
Always dry completely and never leave to air-dry. Tap water contains minerals that may leave deposits creating water spots.
-
Use quality microfiber towels for best results and avoid aggressive wiping, allowing the material to absorb the water.
Waterspot & dropping removal
-
Never use aggressive products to polish the coating or remove surface contamination.
-
Never use excessive force to remove water spots.
-
Bird droppings, tar, sap, etc. should be removed as soon as possible to avoid temporary staining or hardening on the coating. Any staining left behind from the bird droppings will break down over a few days without affecting the coating.
Interior coating maintenance
-
For best results, clean all leather/vinyl surfaces bi-weekly.
-
Vacuum carpets regularly.
-
Immediately wipe off spills on leather, vinyl, or fabric.
-
Immediately absorb and clean stains on carpet.
What Not To Do & What To Do
Don’t
Car washes:
-
Automatic towel wash
-
Use dirty brush
Home Washing:
-
Don’t wash in direct sun
-
Don’t wax or polish
-
Don’t use abrasive towels
Do
Car washes:
-
Hand Wash
-
Touchless Wash
Home Washing:
-
Mild Car wash soap
-
Microfiber wash & dry
-
Wash in shade
A Few Last Care Tips
After Curing is Complete:
Removing Contaminants
Coatings are extremely slick, this means most things will dissolve and be pulled off by the coating self-cleaning effects. Use water or a little vinegar to remove bird droppings, bugs, and tree sap. Followed by wiping it off with a soft edge-less microfiber towel.
Washing schedule
For best results the car should be washed on a bi-weekly basis to avoid excessive contamination build-up. Use only recommended mild soaps. Avoid high volume brush style car washes, high PH detergent style cleaners, and bug/tar removers. Avoid washing in direct sunlight to minimize streaking and water spotting. Wash from the top down leaving the dirtiest sections for last to avoid cross-contamination. Use separate soap.
Washing methods
Standard home washing
-
Use a foam gun (optimal) or microfiber wash mitt to soap down the car. Rinse it off with a pressure washer (optimal) or hose. Dry with clean microfiber towels.
Spray ‘n wash self car washes
-
Select the high-pressure soap. Soap the car down (never use the provided brushes especially on the paint!). Rinse car off with the high-pressure rinse. Dry with clean microfiber towels.
Car washes
-
Touch-less car washes only. Never use a car wash with brushes! Never select the “spray wax” option.
Drying
-
System X Renew™ & "Undrdog Quick Detail" are great for drying aid. Using any of these products and one damp microfiber to first dry the vehicle then follow by using the second microfiber to finish drying. This process will give you the best results.
-
Always dry completely and never leave to “air” dry. Tap water contains minerals that may leave deposits creating water spots.
-
Only use quality microfiber towels for best results and avoid aggressive wiping, allowing the material to absorb the water.
Spot Removal
-
Never use aggressive products to polish the coating or remove surface contamination.
-
Never use excessive force to remove spots.
-
Bird droppings, tar, sap, etc. should be removed as soon as possible to avoid temporary staining or hardening on the coating. Any staining left behind from bird droppings will break down over a few days without affecting the coating.
After Washing
Do not wax the coating, many products contain solvents and abrasives. "System X Renew™" or "Undrdog Quick Detail" are the recommended maintenance and aftercare products.
Automated Washing
Always go to a touch-free wash! Using an automated car wash with brushes will void your warranty. Coatings takes 2-3 days to achieve full hardness. Please handle with care and do not wash the vehicle for the first 2 weeks.
Annual Inspections
Annual Inspections are the recommended process for ensuring the coating is maintained and care for the vehicle is properly executed. Annual inspections should be carried out by an approved applicator within 30 days before the anniversary date of the last service to ensure peak performance and warranty validity. Although durable and long-lasting, annual inspections ensure maximum gloss and protection.